Pic of the week 28/2/16
… to fix the shower.
Perhaps not the most glossy of pics but we had our new shower installed on Monday and by Tuesday it was dripping like mad. And this annoyed me.
So I did my research and I drew the conclusion that the problem was centered around the shower cartridge. A replacement cartridge is circa £50, and I had resigned myself to buying a new one and replacing the one installed. But before I did, I thought I’d try a little experiment. I put the shower on full cold and turned it on and off a few times, adjusted the temp, back on full cold, on & off again: my theory being that the problem was probably caused by a bit of grit in the system, or the cartridge just not re-seating properly.
Anyway, it appears to have fixed the problem, so well worth a pic of the week!
I also adjusted the max temp (upwards), see pic below (turn anti-clockwise to increase temp: 90 deg. turn = approx 1 deg temp.)
(for future ref, here is the link to the PDF instructions for the Mira Pronta EV shower)